Step by step tutorial for a freeRTOS project on the Hercules TMS570LC43x and RM57Lx LaunchPads.
An accessory to monitor and analyze the performance of brakes in automotive vehiles.
A smart, low-cost advanced driver assistance system powered by a Sony Spresense board.
Sensors for a car.
Add distance and depth measurements regardless of lighting conditions to Donkey Car!
How to use PubNub Presence for realtime IoT monitoring for devices to get device state, health and status.
An intelligent drive.
Detection of pedestrian while driving which are not in the line of sight of the driver by the micro-doppler signature generated by movement.
Steering wheel with an integrated LCD screen to view racecar stats and buttons to change racing modes and torque vectoring on the fly.
This post gives a brief introduction of how to visualize your self-driving model. it can be very helpful for the model debugging.
How to install some Amazon sourced LED lighting on the windshield and the bumper of an '03 Jeep Wrangler (TJ) from beginning to end.
Rover project using the Renesas Synergy S7G2 MCU on board a Future Designs SYG-SOM module powering a Dagu Rover5 chassis/motor controller.
Use a Quadrature Encoder and EQEP with TMS570LC43x LaunchPad (and others).
Gather in-vehicle sensor data (temperature, force, etc. ) to help compare with data sent by vehicle sensors.
Configure the RAM space for the DMA touched memory in a correct way
Driver library makes Hercules LaunchPads and Hercules micro controllers work with Hitachi type LCD.
This application can help to test self-driving model by using video. The developer also can use this tool to understand how the model works.
Bicycle with calories burned indicator system. Data will also be uploaded to cloud for analyzing the trends in terms of calories burned.
The Hercules TMS570LS04 does not have I2C hardware. We turn the onboard timer into an I2C master.
In this blogtut, we made a simple but advanced online axial monitoring system using basic nodes of the Node-RED.
Poor man's CAN tester with 2 diodes and 1 resistor.
Simple how-to guide to set up the ePWM module of your LaunchPad and increase / decrease the duty cycle with the two user buttons.
A complete car log on monitoring the steering wheel, air conditioning, and sound system levels. It is also a dryer machine alert.
AGL (Automotive Grade Linux) demos for 96Boards based on Dragonboard410c.