This LTspice simulation shows how to model this NTCLE317 +/-0.5 °C accuracy thermistor used in a simple ADC circuit.
Measure the light intensity in the room and output data to a web API.
Creating a digital to analog converter (DAC) 8-bit using resistor ladder (R-2R Ladder) and implemented it in Arduino Uno to create signals.
Analog-to-Digital Converter connected on I2c bus. ADS1115 is part of a product family witch contains ADS1113, ADS1114, ADS1014, ADS1015.
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
A low budget acquisition system for low budget sensors.
Use the eTape Liquid Level Sensor on the MCP3008 8-Channel 10-Bit ADC with SPI interface.
Raspberry Pi can also be used in places without electricity. If you can monitor battery voltage, critical data can be saved.
Light up three different LEDs using pulse width modulation corresponding to different ranges of analog input voltages.
Using the library SoftSerial and doing the configuration of one 10-bit ADC pin.
Real-time charts are the most effective way to show IoT data.
ASIC implementation of the PicoRV32 PicoSoC in X-Fab XH018. It contains two ADCs, a DAC, comparator, bandgap, RC oscillator and other IP.
Make that industrial sensor remotely accessible without writing a single line of code.
Receiving and sending the digital and analog signal through AD5669 interface with Arduino to detect the A/D pulses.
In this project, we will make a function generator using the gen4-uLCD-43DCT-CLB display module.
This project will allow you to display a battery level and current date and time on the OLED expansion.
For the MCU BoosterPack Design Challenge
A revamping of the Bright or Not project using the Microsoft ADC Bus provider for the MCP3008
When diagnosing industrial equipment and conducting scientific research, there are always problems of data collection.
This program demonstrates the use of reading an ADC Channel value and displaying it on an I2C 7-Segment Display
A basic breakout for the ADG732 32 channel multiplexer and video tutorial!
The pH Level Monitor project uses 4D Systems' gen4-uLCD-50DT to display the pH level of a certain substance.
Maybe I add the note latter. This project is about how to something to be digital.
Graph live data from analog sensors.