This is the SECOND PART of my build of the Rover in the movie The Last Days On Mars.
A simple and small music box with customizable tunes. Parts involved? Arduino Micro, buzzer and a switch.
The Critter is a simple Arduino walking robot that is fully 3D printed.
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Conception of connected bird feeders, able to alert if the seed tank is empty and analyses its use by birds.
While docked, the Pebble Time speaks the time to you with a wave of your hand.
3D-printed mask with projection mapping built in. Literally change your face to anything you want.
A clock made with 60 LED strip, FadeCandy, Raspberry Pi Zero W, Node.js and WebSockets.
This is a very versatile robot with a multitude of features, the chassis can be 3D printed, and there is a lot of room for expansion.
Robust weatherproof solar powered weather station. Uploads to Weather Underground via WiFi.
A pair of spiked brass knuckles which lets player's harness their rage while they play Id Software's 1993 classic, Doom.
This watch has a modular design that combines digital and analog tools including fall detection, alarms, medication storage and photo frames
This project covers building and coding a robot that pans, tilts, and THROWS FISTS. Make two and fight 'em to the death!
The only enclosure for your Uno that can accommodate any shield stack height and can fit non-shield boards.
ShopArm is a 3D printed robot arm built to act as a personal assistant.
If you are designing a small board and you're looking for a way to program it without taking up a lot of space, try making a pogo pin jig!
This outfit has a solar panel on the shoulder which can charge a 5V device, like a phone, a speaker, a portable charger, etc. through USB.
The circuit was printed with the Electrifi conductive filament in 15 min. All 64 WS2812b SMD LEDs were attached to the circuits in 20 min.
Activate a 360° lithophane with a secret key, and pick from a few light modes.
I heard you like Christmas ornaments, so I 3D printed a Christmas ornament 3D printer, that 3D prints Christmas ornaments.
Designed for waiting rooms, this literature dispenser will give you short stories to read.
The robot is controlled with an Arduino Nano and only uses 2 motors and 2 sensors. The program to control the robot is only 843 bytes big.
How many Nicoles are there in Belgium? Use this awesome 3D-printed map to find out!
Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.