The embedded circuit was printed with the Electrifi conductive filament on a dual extrusion printer.
The circuit was printed with the Electrifi conductive filament in 15 min. All 64 WS2812b SMD LEDs were attached to the circuits in 20 min.
A conductive 3D printing filament was smushed into the LED contacts using a soldering iron to complete the circuit.
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
When someone passes by, this 3d printed ghost table lights up and squeals!
Arc RGB LED lamp with WS2812B.
This article is about controlling the TP-Link HS100/HS110 smart home automation power sockets via Machinekit HAL.
This article is about porting the Turnigy Fabrikator Mini from HobbyKing to Machinekit. It explains the basics of porting a new 3D printer.
Print out a little purse!
I don’t have a VPN, so let’s make an AR (augmented reality) Pikachu!
Tired of your phone running out of juice when you can't reach an outlet?
Universal Serial Bus? More like Ultimate Sword Blade!
Designed the Strappy Key Chain after seeing the Orbitkey.
Upgraded a Snowspeeder (by Playskool) to fire missiles.
Prove you are worthy to wield Mjölnir!
I built my own GameBoy using Raspberry Pi and Adafruit components.
Control and monitor your 3D printer over the internet using a $9 computer.
I found a way to make a toy car that can overcome the gravity.
6 Years of My 3D Printing of Humanoid Robots Project or My adventures in additive manufacturing.
Build your own chocolate printer.
You don't need a fancy USB serial connector for your multiple IoT PCBs. It's easy to create your own quick and inexpensive connector.
Throw a real-life ball to catch Pokémon in Pokémon Go.
Raspberry Pi opens a lot of possibilities for do-it-yourself projects. It’s affordable and full of potential.
3D printed "Quartz Crystal" looking nightlight.