This project is first test for Mikroelektronika Flip&Click board. The board is based on Arduino DUE platform, and has 4 MikroBus click slot. For this test, two simple click Boards are used: Bluetooth adapter and Button board. For communication with board an Bluetooth Terminal Android app is used. Send '1' for turn on LED, '0' for turn off. If button is pressed, message appear on BT terminal window....
Flip & Click Board
Bluetooth Click is an accessory board in mikroBus™ form factor. Enrich your device with bluetooth capability with up to 100m range. Board offers low power, highly economic Bluetooth radio for adding wireless capability to your products. On-board RN-41 module with UART interface is easy and simple to use. Board is designed to use 3.3V power supply only.
Button R click is the simplest solution for adding a single push button to your design. The button itself is transparent, 6.8mm in diameter and has a red LED backlight. When pressed, it sends an interrupt signal to the target board microcontroller. The backlight LED is controlled separately through the mikroBUS™ PWM pin, so you can program all kinds of patterns (varying level of light intensity or rate of blinking on subsequent button presses). The board can use either a 3.3V or a 5V power supply.