Ingo Lohs
Created July 6, 2020 © LGPL

Infrared controls a LED Stripe

Other spare parts are used to operate an infrared interface to switch an LED strip via relay

BeginnerProtip1 hour1

Things used in this project

Hardware components

Arduino Nano R3
Arduino Nano R3
with USB-cable to power the Arduino with 5V DC
×1
Breadboard (generic)
Breadboard (generic)
×1
Jumper wires (generic)
Jumper wires (generic)
×1
Infrared Module (Generic)
spare part and a spare Remote Control (in my case from a HDMI Switch with at least 2 buttons)
×1
Relay (generic)
Songle SRD-05VDC-SL-C on a breakout board with 3 PINs
×1
Connector Adapter, DC Power - 2.1mm
Connector Adapter, DC Power - 2.1mm
×1
9V 1A Switching Wall Power Supply
9V 1A Switching Wall Power Supply
12V DC connect to the Connector Adapter
×1

Software apps and online services

Arduino IDE
Arduino IDE

Story

Read more

Credits

Ingo Lohs

Ingo Lohs

177 projects • 156 followers
I am well over 40 years and come from the middle of Germany.

Comments