Hendra Kusumah
Published © GPL3+

Ardubuino

An Arduboy-compatible DIY console.

IntermediateProtip3 hours499

Things used in this project

Hardware components

Pro Micro - 5V/16MHz
SparkFun Pro Micro - 5V/16MHz
with male header
×1
6x6x5 mm tactile Button with button Cap
actually any 6x6 tactile button will do, but this one I recommend for the model that I build
×6
0.96 Inch 7 Pin SPI Oled module
o not use the I2C Oled, because it is incompatible with the arduboy platform
×1
5v small circle Buzzer
×1
3 Pin slide switch
×1
solder
×1
soldering iron
×1
flux
×1
third hand or bit vise
optional
×1
3.7 volt Lipo Battery
actually You can use various kind of battery as long as the Pro Micro capable of
×1

Software apps and online services

Arduino IDE
Arduino IDE

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Schematics

ardubuino_pD55Kp3Cft.png

Code

Github

https://github.com/chalei/ardubuino

Credits

Hendra Kusumah

Hendra Kusumah

15 projects • 70 followers
Love hacking and making new things from IoT to robotics

Comments