Greg's Builds
Published

Boredom Busting Breakout Bowtie

You've got an interview at 10, but you're across the city and taking the train. This gadget keeps you entertained AND looking sharp. BBBB.

IntermediateShowcase (no instructions)250

Things used in this project

Hardware components

SparkFun Micro OLED Breakout
SparkFun Micro OLED Breakout
×1
ATtiny85
Microchip Technology ATtiny85
×1
IC & Component Socket, 8 Contacts
IC & Component Socket, 8 Contacts
×1
LilyPad Coin Cell Battery Holder - Switched - 20mm
SparkFun LilyPad Coin Cell Battery Holder - Switched - 20mm
I used the non-switched version.
×1
Toggle Switch, (On)-Off-(On)
Toggle Switch, (On)-Off-(On)
I did not use this exact one, I found a momentary one that defaults to "off" at a local electronics shop.
×1
Through Hole Resistor, 120 kohm
Through Hole Resistor, 120 kohm
×1
Through Hole Resistor, 22 kohm
Through Hole Resistor, 22 kohm
×1
Through Hole Resistor, 220 kohm
Through Hole Resistor, 220 kohm
×1
Through Hole Resistor, 5.6 kohm
Through Hole Resistor, 5.6 kohm
×2

Software apps and online services

Atmel Studio 7
Microchip Technology Atmel Studio 7
AVRDUDE
AVR-GCC

Hand tools and fabrication machines

Old Craftsman Router
Weller Soldering Iron
Jig Saw
Various hand tools
Sanding block, files, sandpaper
Drill / Driver, Cordless
Drill / Driver, Cordless
Logic Analyzer

Story

Read more

Schematics

Breakout Bow Tie Schematic

Code

ATTINY85 Breakout Bowtie

Credits

Greg's Builds

Greg's Builds

0 projects • 2 followers
Is it too much to build my projects and eat them too? Aspiring mad scientist from Canada. Designing firmware for industrial cameras.

Comments