Creative creator
Published © CC BY

LED Dimmer Circuit with 555 Timer

Simple & Easy LED Dimmer Circuit Using 555 IC for LED Strip Lights. I will be able to show you ways to form a dimmer circuit for LED Strips,

BeginnerFull instructions provided1 hour1,744
LED Dimmer Circuit with 555 Timer

Things used in this project

Hardware components

IRFZ44N UTSOURCE
×1
5MM LED UTSOURCE
×1
RESISTOR UTSOURCE
×1
CAPACITOR UTSOURCE
×1
555 TIMER UTSOURCE
×1

Hand tools and fabrication machines

SOLDERING IRON STAND UTSOURCE
SOLDERING IRON UTSOURCE
NOSE PLIERS UTSOURCE
FLUX UTSOURCE

Story

Read more

Schematics

Step 1

Here are Some Pictures for creating the Circuit. I even have made the LED Dimmer Circuit within the PCB for creating the circuit as simple as possible. you'll also make the circuit within the Breadboard. But there could also be loose connection So I even have Directly Soldered all Components. So, there'll not be any loose connection.

Step 2

Here are some Detailed Pictures of the Circuit which I even have made on the computer circuit board. I even have connected a 12V LED with the circuit and connected it with 12v Power Supply.

Step 3

Step 4

You should use a fine little bit of the hand tool. it'll be easier to solder on the breadboard.
Use a heat shrinking tube for or securing the required connections.
The flyback diode isn't necessary for the LED dimmer circuit. But if you're making the motor speed controller then you ought to use the flyback diode it'll protect the transistor from the motor back EMF.

Credits

Creative creator

Creative creator

10 projects • 2 followers

Comments