Creative creator
Published © CC BY

How to control WS2811 RGB LED with Arduino

ws2811 addressable RGB LEDs are Great for producing different colors. Let’s make a ws2811 RGB LED Controller For controlling the Pixel LEDs.

BeginnerFull instructions provided1 hour1,246
How to control WS2811 RGB LED with Arduino

Things used in this project

Hardware components

UTSOURCE Electronic Parts
UTSOURCE Electronic Parts
Arduino Uno R3 Board UTSOURCE:
5V Power SupplyUTSOURCE:
General Purpose Resistors
UTSOURCE General Purpose Resistors
General Purpose Capacitors
UTSOURCE General Purpose Capacitors

Hand tools and fabrication machines

Soldering Iron UTSOURCE:
Iron Stand UTSOURCE:
Nose Pliers UTSOURCE:
Capacitor UTSOURCE:


Read more

Custom parts and enclosures

Association for WS2811 RGB LED:

The RGB LED strips I have purchased, have a Male port and a Female port. The male port is utilized for imparting the information sign from the controller to the LEDs. Also, the female port is utilized for imparting the information sign into the following LED strips. Along these lines, the association goes and we can control a WS2811 RGB LED.
The LEDs take DC 5V to run. However, we as a whole realize that DC has some extraordinary misfortunes. So you will see that the LED close to the force flexibly is gleaming more than the Last LED strips.

For taking care of this difficult we have to associate all LEDs +ve and all LEDs GND. At that point we need to give the force in every single strip.

Structure Metrics:

You can make an extraordinary showcase with these LEDs in principle cases the LEDs which are utilized are ws2812 LEDs. These LEDs have high Density so it implies the showcase which will be delivered would be a lot more noteworthy contrasted and ws2811 LEDs.

For making the image you will require a LED Driver on the grounds that there are such a large number of LEDs you can't control every one of them with one Arduino (It isn't unthinkable. Be that as it may, it is difficult to do with Arduino to run a video record through Arduino). So fundamentally individuals utilize a legitimate t300k controller for controlling these LEDs. What's more, it is anything but difficult to do.

You will require an ethernet link for it. Associate the controller with your pc and afterward open the given programming. At that point run, any video record and your video document will run in the presentation. It is extremely straightforward.




Creative creator

Creative creator

22 projects • 3 followers