Chip McClelland
Published © GPL3+

WiFi Data Logger

Logs GPS location whenever it detects movement.

IntermediateFull instructions provided6,724
WiFi Data Logger

Things used in this project

Hardware components

SRR4028 3.3uH Inductor
×1
12mm Battery Holder - PTH
×1
Optional 4.7k Pull-Up Resistors for I2C
×4
40-pin Female 0.1" Header (for Teensy, GPS and WiFi)
×2
Red LED - 0805
×1
Green LED - 0805
×1
2.2uF Capacitor - 16V-20%-(1210)
×1
47uF Capacitor - 25V-+80/-20(0805)
×1
0.1uF Capacitor - 25V-+80/-20(0805)
×1
Adafruit Ultimate GPS Breakout - ID: 746
×1
SWITCH-SPDTPTH EG1218
×2
1x6 Male 0.1" headers
×2
JST-2-PTH Standard 2-pin 0.1 header
×1
MOSFET-PCHANNEL SOT23-3
×1
330k ohm resistor - 1/8 watt - 0805
×2
10k ohm resistor - 1/8 watt - 0805
×2
1k ohm resistor - 1/8 watt - 0805
×2
4.7k ohm resistor - 1/8 watt - 0805
×4
Momentary Switch - TAC_SWITCHPTH TACTILE-PTH
×1
Teensy 3.1 with Male Headers
×1
TI Buck-Boost 5V DC-DC Converter - TPS63002DRCR - PVSON10
×1
10k Trimpot (thumb knob)
×2
Adafruit CC3000 Breakout Board - ID: 1469
×1
Sparkfun MMA8452 Breakout
×1

Story

Read more

Schematics

Oshpark

Teensy Data Logger Board

Schematic

Code

Github

https://github.com/chipmc/Teensy-Data-Logger/tree/master

Credits

Chip McClelland

Chip McClelland

6 projects • 116 followers
I build connected sensors.

Comments