Bribro12
Published © CC BY-NC-ND

3D-Printable Linear Actuator

This linear actuator is almost completely 3D-printed and only has some very inexpensive materials.

BeginnerFull instructions provided16 hours502
3D-Printable Linear Actuator

Things used in this project

Hardware components

M8 thread rod
×1
M8 nuts
×7
8mm inner diameter bearings
https://www.banggood.com/10pcs-8x19x6mm-Steel-Sealed-Shielded-Deep-Groove-Ball-Bearings-698ZZ-p-980204.html?rmmds=myorder&cur_warehouse=CN
×2
electric motor 36 Volt
https://www.banggood.com/775-Gear-Motor-DC-12V-36V-3500-9000RPM-Motor-Large-Torque-High-power-Motor-p-1091058.html?rmmds=myorder&cur_warehouse=CN
×1
3D-printed parts, can be found on thingiverse
×1
Pulley for motor side
https://www.banggood.com/162030T-GT2-Aluminum-Timing-Drive-Pulley-For-DIY-3D-Printer-p-1001266.html?rmmds=myorder&cur_warehouse=CN
×1
Gt2 timing belt 260-GT2-6
https://www.robotdigg.com/product/283/260mm-264mm-268mm-280mm-288mm-or-294mm-gt2-endless-belt
×1

Story

Read more

Custom parts and enclosures

Thingiverse

https://www.thingiverse.com/thing:2783959

Credits

Bribro12

Bribro12

14 projects • 10 followers
I'm a maker. I design and create my own projects and build them from scratch. My favorite tools are my 3D-printer and laser cutter

Comments