Software apps and online services
This tutorial will show you how to build your very own sensor monitoring station. Once completed you can use it for applications such as fish tank/aquarium, hydroponics, aquaponics, and even your swimming pool. It utilizes the Atlas IoT software on the Windows IoT 10 platform for Raspberry Pi. Atlas IoT allows you to monitor in real-time, multiple parameters within your systems, for example, the potential of hydrogen (pH), salinity and dissolved oxygen (DO).Advantages
- Can be used as a standalone unit
- Works with Atlas Scientific's EZO circuits: pH, salinity, dissolved oxygen (DO), oxidation-reduction potential (ORP), temperature, CO2, peristaltic pump, and pressure.
- Monitor up to 6 EZO sensors (these can be different or multiples of the same), I2C mode only
- Real-time monitoring
- Easily calibrate sensors
- No wiring needed
- No programming required
- Color touch screen technology
- Cloud connection via MQTT
- The software is FREE
Download and install Windows 10 IoT Core Dashboard which allows you to set up your Raspberry Pi from your PC.Step 2: Micro SD Card
Once the Windows 10 IoT Core Dashboard has been installed, open the program and select Set up a new device.
Signing in with a Microsoft account is not required, click Skip this step.Step 4: Install Windows on the SD Card
Device type: Raspberry Pi 2 and 3
OS Build: Windows 10 IoT core 17763 (or higher)
Drive: Your micro SD card
Device Name: How you will see the Pi on your network
Password: How you will access the Pi (remember your password)
Check the box for the license terms and then click Download and install to put the IoT core software on your micro SD card. This will take about 4 minutes.
Once your micro SD card is ready, insert it into the Raspberry Pi.Step 5: Assemble The Hardware
The EZO circuits MUST be put into I2C mode and be assigned a unique I2C address. The addresses can be an integer number from 1 to 105. For more information on how to switch protocols and assign addresses, refer to the following LINK.
The Micro USB female to 2 micro USB male splitter cable is used to share the power from the supply with the display and Raspberry Pi.
The Atlas IoT software is currently not compatible with the Raspberry Pi 3B+.Step 6: Boot Up
Power your device.
The boot screen may appear upside down on the display. This is remedied after the next few steps.Step 7: Set the WiFi
Once Windows 10 has finished booting, you will be asked to adjust a few settings. This is why you need the USB keyboard.
Enter the username and password, as shown in fig1 above.
Password: this is the password you created in step 4.
After logging in, Windows will then ask you to connect to a WiFi network (Do not skip this step). Once the Windows setup is complete, you will be brought to the IoT core Default Application page, shown in fig2 above.Step 8: Prepare to Install Atlas IoT
Now that Windows 10 is on your Raspberry Pi, it is time to install the Atlas IoT software. In the IoT Dashboard, under My Devices, you should now see your Raspberry Pi.
Double click on your Raspberry Pi
Click on Open Windows Device Portal in browser. A web page will open and you will be asked to log into your newly setup device. Enter the user name and password-
Password: this is the password you created in step 4Step 9: Adjust Settings
You are now in the device portal (back end) of your Raspberry Pi. Under Device Settings, you can make adjustments to things like display orientation, resolution and time zones. Also, this is where you will be able to correct the flipped screen from step 6. If you don't have any settings to adjust, move to step 10. If you do make any changes the device must reboot before you can continue.Step 10: Install Atlas IoT
Download the software from the following link: Atlas IoT version 2.6.
Once the zip file downloads, extract the files and head back to the IoT Core Device Portal.
Click on Apps->Apps manager. Then click Choose file and locate atlas_iot_x.x.x.x_ARM.msix from the extracted zip file you just downloaded. Don't hit install, you're not done.
Three more files are needed for the installation to be completed and they have to be added one at a time.
Click on the checkbox that says Allow me to select framework packages, click Next and then click Choose file (again), go back to your extracted zip file. Dependencies > ARM > ( you will find three .appx files in there. Double click the first one. Repeat the process for the remaining two files).
Now click install. It should take about 1 minute.Step 11: Startup
Once the installation is finished, the Atlas IoT software will be displayed on a list of installed apps. To begin running the software, click the startup button. Installation is now complete!DemonstrationCloud Settings Guide
Refer to the following link for instructions: cloud settings guideHow to Update the Atlas IoT Software?
Refer to the following link for instructions: updating software