Sharifdeen Ashshak
Published

Water your plants using soil moisture sensor

You can easily water your plants using IOT with the Soil moisture sensor

BeginnerFull instructions provided748
Water your plants using soil moisture sensor

Things used in this project

Story

Read more

Code

Code pardt

C/C++
//for more project visit www.blackkeyhole.com
#define BLYNK_PRINT Serial


#include <ESP8266WiFi.h>
#include <BlynkSimpleEsp8266.h>

int sensorpin=A0;
int sensorvalue=0;
int outputvalue=0;

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "";

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "";
char pass[] = "";

void setup()
{
  // Debug console
  Serial.begin(9600);

  Blynk.begin(auth, ssid, pass);
}

void loop()
{
  sensorvalue=analogRead(sensorpin);
  outputvalue=map(sensorvalue,0,1023,0,100); //100,0 pottupaaru
  delay(1000);

  if(outputvalue>74)
  {
       Serial.println("water your plant");
       Serial.print(outputvalue);
       Blynk.notify("water your plant");
       delay(1000); 
  }
  else if(outputvalue<45)
  {
       Serial.println("soil is wet enough to water");
       Serial.print(outputvalue);
       Blynk.notify("soil is wet enough to water");
       delay(1000);
  }
  
  Blynk.virtualWrite(V1,outputvalue);
  Blynk.run();
}

Credits

Sharifdeen Ashshak

Sharifdeen Ashshak

26 projects • 12 followers

Comments