Though now the machine learning acceleration flow on MPSoC devices are gone to Vitis-AI flow, the DNNDK flow might be followed less. However we are releasing the DNNDK flow based DPU (3.0) TRD for Ultra96 V1 FPGA.
We are also releasing the Vitis-AI based tutorials soon!
In this tutorial we have used the DPU (3.0) IP with DPU architecture= 1152. This architecutre consume less resources (LUT, BRAM and DSP). And we dont have the channel argumentation, softmax etc, which is shown here:
The initial design and configuration is taken from the DPU integration tutorial, we migrated that project to VIVADO 2019.1. We updated the DPU IP (3.0) and setup the IP configuration again. Now synthesis done, then we use this Tcl command before implementation:
set_param place.runPartPlacer 0
Without this Tcl command you might get timing error on the project. After implemented, create Bitstream of the project and then export it (including bitstream). Now after the process will involve on Petalinux 2019.1.Petalinux Development
The Petalinux steps are also listed here:
- Steps included here: xilinx-Resnet50_on_Ultra96v1_2019_2.pdf
- Petalinux steps explained here to: dpu-3-0-trd-for-zcu106
- Social Distancing detection/measuring and alarming solution
- Vehicle Counting Application for Traffic Analysis
For these ML applications and more, please write us at: email@example.com
Thank you for going through this tutorial!