Elite Worm
Published © GPL3+

3D Printer Clog Detector

I designed this small device to be able to alert me in the unfortunate event the nozzle clogs.

IntermediateFull instructions provided6 hours748
3D Printer Clog Detector

Things used in this project

Hardware components

DigiSpark
DigiSpark
×1
128 x 32'' OLED Display
×1
5 x 10 x 4 mm Ball Bearings
×2
5 V Active Buzzer
×1
5 mm White LED
×1
LDR, 5 Mohm
LDR, 5 Mohm
×1
Resistor 1k ohm
Resistor 1k ohm
×2
Through Hole Resistor, 4.7 kohm
Through Hole Resistor, 4.7 kohm
×1
Tactile Push Button (6 x 6 x 9.5 mm)
×1
M2 x 6 mm Screws
×7

Software apps and online services

Arduino IDE
Arduino IDE

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Custom parts and enclosures

3D Files

Schematics

Schematic

Code

Code

Use the Arduino IDE in order to upload it to the microcontroller

Credits

Elite Worm

Elite Worm

4 projects • 2 followers
I make projects involving electronics, 3D printing and more. YouTube.com/c/EliteWorm

Comments